Hotcoldwetchipsbulk goodspackages

At a glance

  • Nominal widths from 100 to 1,500 mm
  • Hinges flat or checkerplate
  • Hinge thickness 5 mm
  • Hinges made throughout of a single piece
  • Gap between hinges max. 1.5 mm
  • Side wing height 59 mm
  • Smallest radius for de ection of belt in
    upward direction 300 mm
  • Drive chains inner width 30 mm
  • Roller Ø 55 mm
  • Breaking load of each chain 130,000 N
  • Maximum operating temperature 300° C
Hinged Steel Belt Pitch 100
Hinged Steel Belt NW = Nominal width
For a sprocket with z=6 the hub diameter may not be greater than max. 75mm. For z = 6 and a hub diameter greater than 75 mm the hub must face outwards. Otherwise the side upstands would collide with the hub diameter.
Connecting link
Riveted connection link for hollow pin chain, Inner width 30 mm
Hollow pin chain, Inner width 30 mm, Hollow pin bore diameter Ø 11,2 mm, Roller Ø 55 mm, Breaking load FB min. 130.000 N


Checkerplate with side wings
Checkerplate with side wings
Flat with side wings
Flat with side wings